Borderless Printing; Supported Media Type - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Borderless Printing

You can print your data without margins on
paper. There are two types of borderless printing.
Note:
If you are using roll paper, all four sides can be
borderless, and if you are using a sheet of paper, only
left and right sides can be borderless.
❏ Auto Expand
Enlarge the size of print data automatically
and print without margins. Enlarged areas
that exceed the paper size will not be printed
on the paper.
❏ Retain Size
Using an application, enlarge your image data
to exceed the paper width and height, to avoid
unprinted areas appearing along the left and
right edges. The printer driver does not
enlarge the image data. Enlarging 3 mm in
both the left and right directions (total of
6 mm) is recommended by using the
application that created the data.
Select this setting if you do not want to change
the ratio of your print data by the printer
driver.
User's Guide
Variety of Printings

Supported media type

The following media sizes are supported for
borderless printing.
Paper width
254 mm/10 inch
300 mm
329 mm/13 inch/Super A3
406 mm/16 inch
432 mm/17 inch
515 mm/B2
594 mm/A1
610 mm/24 inch/Super A1
728 mm/B1
914 mm/36 inch/Super A0
1118 mm/44 inch/Super B0
✽ Epson Stylus Pro 7900/7910 does not support these
size.
Depending on the media type, the print quality
may decline or the borderless printing is not
supported. See the following section for detailed
information.
See "Paper Information" on page 171
136
✽
✽
✽