Epson Stylus Pro 7900 User Manual page 158

Epson Stylus Pro 7900/7910/9900/9910
C
Select the registered number for the user
setting.
You can select the number from 1 to 10.
1. Press the /
number you want to register.
2. Press the button.
The settings you make from step 4 are
registered in the number you have selected
here.
Note:
We recommend you write down the registered
number and the settings you make from step 4.
D
Select paper type, if necessary.
1. Press the /
TYPE, and then press the
2. Press the /
type, and then press the
3. Press the /
4. Press the button.
5. Press the button twice to go back to
the previous menu.
User's Guide
Variety of Printings
button to select the
button to select PAPER
button.
button to select media
button.
button to select media.
E
Set the distance between the print head and
the paper (Platen Gap), if necessary.
1. Press the
GAP, and then press the
2. Press the
suitable setting for the paper.
3. Press the
4. Press the
previous menu.
Note:
You can adjust the distance between the print
head and paper. The print quality improves
when you adjust the Platen Gap properly. If
the Platen Gap is too narrow when you print
on the thick paper, the print head touches the
paper so that the print head and the paper may
be damaged.
Paper thickness
Thick paper
Normal paper
Thin paper
158
/ button to select PLATEN
button.
/ button to select a
button.
button to go back to the
Platen Gap
Wider
Wide
Standard
Narrow