Loading Tabbed Sheets In Multi-Sheet Bypass Tray - Oce 750 User Manual

Maintenance & Supplies
Loading Paper (continued)

Loading Tabbed Sheets in Multi-Sheet Bypass Tray

Load offset tabbed sheets so that the tab extensions are on the right at the rear (not
front) of the tray. The top sheet is designated face up as the first tab of the finished set.
Subsequent offset tab sheets follow in sequence.
When loading tabbed sheets in the Multi-sheet bypass tray, be sure to specify the paper
type as TAB on the Paper Type/Size Setting Screen; otherwise mishandled paper may
occur. See p. 5-11.
Rear
Front
Rear
Front
Example: 3 Tabbed sheets loaded in position for one finished set.
1st TAB
2nd TAB
Section 1
Introduction
3rd TAB
Printed
side
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1st TABS
2nd TABS
3rd TABS
Section 1
Introducttion
Printed
side
1st TAB
Section 1
2nd TAB
Introduction
3rd TAB
ONE FINISHED SET
1st TAB
2nd TAB
Section 1 Section 1 Section 1
Introduction Introduction Introduction
3rd TAB
3 FINISHED SETS
Maintenance & Supplies 7-7