Timer Interrupt Password Setting [5] - Oce 750 User Manual

Key Operator Mode
Weekly Timer [9] (continued)

Timer Interrupt Password Setting [5]

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit Key Operator password, then touch
Mode Screen. (See note 1.)
2 Touch
[9] Weekly timer
to display the Weekly Timer Setting Menu Screen. (See note 2.)
OK
NOTES:
1 If an invalid password is entered, enter a valid 4-digit password.
2 If an invalid Weekly Timer master key code is entered, continue by entering the valid 4-digit code.
3 Touch
[5] Timer interrupt password set
Setting Screen.
4 Use the touch screen keypad to enter a 4-digit password, and then touch
complete the setting and return to the Weekly Timer Setting Menu Screen.
NOTE: When the password setting is 0000, Timer Interrupt can be used simply by turning the printer
OFF, then ON. In this case, you will be asked to enter the duration of use (a period of time to turn the
printer power on).
5 If other Weekly Timer settings are required, select another desired menu item, from
[1]~[5].
6 Touch
PREVIOUS SCREEN
Operator settings are required, select the desired menu item, from [1] to [17].
7 Touch
PREVIOUS SCREEN
operations.
8-28 Key Operator Mode
Timer Interrupt Password Setting Screen
. Enter your 4-digit Weekly Timer master key code, then touch
to display the Timer Interrupt Password
to restore the Key Operator Mode Screen. If other Key
to return to the Basic Screen and perform printing
.
Key Operator Mode
to display the Key Operator
OK
to
OK