Punching Mode - Oce 750 User Manual

Output Modes

Punching Mode

The Punching mode is available only when the Punch Unit option is installed on the
Finisher-Folder.
When the Punching mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray according to
the selected output mode.
NOTE: Some staple positions previously selected may conflict with this function.
Print paper size: 11"x17", 8.5"x11" (20 lb paper recommended)
Paper weight: 20 lb~24 lb bond recommended
Thin paper; 16 lb~19 lb
Thick paper; 25 lb~45 lb
Number of holes: 3 holes
Hole diameter: 0.315" ± 0.020" (8.0 mm ± 0.5 mm)
Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
Incompatible Basic Printing Conditions: Output to Secondary (sub) tray, Rotation Sort,
Rotation Group, Folding/ Stapling & Folding/ Trimming mode
Incompatible Special Originals: Non STD Size
Incompatible Applications: Booklet, Transparency Interleave
6-10 Output Modes
4.252"
(108mm)