Oce 750 User Manual page 110

Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. Data Edit [1] (continued)
To Add ECM Data:
(1) Touch on the ECM Data Edit Screen. The ECM Data Add Screen will be
Add
displayed.
(2) Touch the desired item key to highlight it, then enter the data by using the touch
screen keypad.
Password: 8 digits max. (See note 1.)
Name: 8 characters max. (See note 2.)
Limit: 999,999 prints max.
NOTES:
1 We recommend that you make a list of all ECM passwords and account numbers.
2 If an invalid user name is entered, continue by the valid name.
(3) Touch to complete the setting and to verify whether the same password or name
OK
has been already used for another account number.
When a password is duplicated:
The Password Duplication Screen will be displayed. Touch
password, or to create duplicate password.
NO
NOTE: If duplicate password is created, the number of prints will be counted only for the ECM password with
the smallest number. We recommend you do not use duplicate ECM passwords.
When a name is duplicated:
The Name Duplication Screen will be displayed. Touch OK to re-enter new name.
To Delete ECM Data:
(1) Touch or key on the right side of the list to highlight the ECM data to be deleted,
then touch . The Delete Confirmation Screen will be displayed.
Delete
(2) Touch to delete, or
YES
To Clear ECM Count:
(1) Touch or key on the right side of the list to highlight the desired ECM data, then
touch
COUNT RESET
(2) Touch to clear the Print count of the selected ECM data, or
YES
Delete Confirmation Screen
8-12 Key Operator Mode
to cancel.
NO
. The Reset Confirmation Screen will be displayed.
Reset Confirmation Screen
to re-enter new
YES
to cancel.
NO