Finisher Capacity Requirements - Oce 750 User Manual

Safety Information

Finisher Capacity Requirements

CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR
MACHINE DAMAGE
FINISHER PAPER CAPACITY
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
Finisher /Finisher-Binder paper weight: 16 lb ~ 24 lb
When the selected print quantity exceeds the maximum paper capacity, remove sheets
as they are output from the finisher.
Paper capacities below are stated for 20 lb Bond. This Finisher also accepts the wide
orientation of regular sizes stated below.
Finisher: Finisher / Finisher-Folder
Primary (Main) tray: Non-sort/Sort/Group mode
500 sheets (5.5"x8.5"R)
3,000 sheets (8.5"x11", 8.5"x11"R)
1,500 sheets (11"x17", 8.5"x14")
The Secondary (sub) tray can be unloaded while the Océ 750 is running.
Set production is not limited by the capacity of the Secondary (sub) tray.
Primary (Main) tray: Staple-Sort mode
1,000 sheets* (11"x17" ~ 8.5"x11"/R)
* The maximum capacity varies according to the number of sheets to be
stapled.
Secondary (Sub) tray: Non-sort mode
200 sheets max.
Booklet tray (Finisher-Folder only)
100 sheets max. (11"x17", 8.5"x14", 8.5"x11", A4R)
(The maximum number of sheets varies, depending on the number of pages in
the booklet and whether Folding or Stapling & Folding is selected.)
Trimmer unit tray (Finisher-Folder with Trimmer unit only)
512 sheets max. (11"x17", 8.5"x14", 8.5"x11", A4R)
(The maximum number of sheets varies, depending on the number of pages in
the booklet and whether Folding or Stapling & Folding is selected. See p. 4-7.)
2-10 Safety Information