Function Setting [3] - Oce 750 User Manual

Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. Function Setting [3]
Use this function to turn ECM On or Off; or to select whether the printer will stop at the
time the count limit is reached, or after the current Print Job is completed.
ECM Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit Key Operator password, then touch
Mode Screen. (See note 1.)
2 Touch
[4] E.C.M. function setting
code is required.
3 Enter your 8-digit ECM master key code, then touch
Menu Screen. (See note 2.)
4 Touch
[3] E.C.M. function setting
5 Touch to activate ECM or touch
ECM On
The selected key will be highlighted.
6 Touch
Immediately
In this case, the paper in process will be completed, and "Enter ECM password" will
display after the Print stops.
Touch to stop the machine after the current job is completed, when Print
After job
limit is reached.
Touch only to display a warning message when Print limit is reached.
Warning
The selected key will be highlighted.
7 Touch to complete the setting and return to the ECM Setting Menu Screen.
OK
8 If other ECM setting changes are required, touch desired key, from [1]~[3].
9 Touch
PREVIOUS SCREEN
Operator settings are required, select the desired menu item, from [1] to [17].
10 Touch
PREVIOUS SCREEN
operations.
NOTES:
1 If an invalid password is entered, enter a valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
. The ECM Master Key Code Screen displays, if a
. The ECM Function Setting Screen will be displayed.
ECM Off
to stop the machine when the Print limit is reached.
to restore the Key Operator Mode Screen. If other Key
to return to the Basic Screen and perform printing
ECM Function Setting Screen
Key Operator Mode
to display the Key Operator
OK
to display the ECM Setting
OK
to de-activate ECM.
.
Key Operator Mode 8-15