Cover Sheet Feeder (Post Inserter) - Oce 750 User Manual

Output Modes

Cover Sheet Feeder (Post Inserter)

The Cover Sheet Feeder is available as an option on the Finisher / Finisher-Folder.
Load cover sheet paper into this device and use the sheets as front covers for printed
sets output to the Main tray; or use the sheets as booklet type covers for printed sets
output to the Booklet tray in the Folding or Stapling & Folding mode.
NOTES:
• Paper loaded into the cover sheet feeder cannot be printed.
• This function is incompatible with cover sheet mode (COVER WITH PRINT SHEET and COVER WITH
BLANK SHEET) in Booklet and Thick paper mode in Sheet/Cover Insertion.
Cover paper size: 11"x17"~5.5"x8.5" (13~110 lb (200g/m
Print paper size: 11"x17"~5.5"x8.5" (20 lb paper recommended)
Incompatible: Output to Secondary (sub) tray, Cover Sheet mode with Booklet
CAUTION:
When the selected print quantity exceeds the Finisher's maximum capacity, remove the copied sheets
while paper is exiting to avoid paper mishandling.
Set with
cover attached
Sets with cover
attached in Folding or
Stapling & Folding mode
2 cover paper))
Cover sheet
Output Modes 6-11