Table of Contents
Advertisement
Record Setup (Cont.)
Motion Record
1.
From the Record Setup menu, select Motion Record (see
Figure 13) using the arrow buttons on the remote, and
press ENTER.
2.
Depending on your record settings, you can adjust Record
Quality, Compression Rate/FPS, REC/Full Screen and Pre
Record. Leave at the factory setting for best results.
3.
Press the plus or minus buttons on the remote to adjust
Record Quality (see Figure 14). There are four settings
under the Record Quality feature. Settings include: Super,
High, Normal and Standard.
4.
Press the plus or minus buttons on the remote to adjust
the Compression/FPS of your recorded video data (see
Figure 15). There are six settings under the Compression/
FPS feature. Settings include: JPEG 15, JPEG 30, JPEG 60,
MP4L 30, MP4L 60 and MP4L 120.
5.
Press the plus or minus buttons on your remote to adjust
the seconds in the REC/Full Screen feature (see Figure 16).
6.
The REC/Full Screen feature determines the amount of
time the triggered camera will display on your monitor in
Full Screen mode. Option settings are 10, 20, 30, 40, 50 or
60 seconds. The feature will only be available in LIVE VIEW,
which is not applicable in most mobile video
surveillance settings.
7.
Press the plus or minus buttons on your remote to turn the
Pre Record feature OFF.
8.
Press the plus or minus buttons on your remote again to
turn the Pre Record feature back to ON.
9.
To save your changes and return to the Record Setup menu,
press the Menu button on the remote.
AngelTrax | 35
13
14
15
16
17
Hide quick links:
Advertisement
Table of Contents
