Key Lock Setup Section - AngelTrax ATCF460 MDVR Quick Setup Manual

Key Lock Setup
1. The Key Lock function is used to password-protect menu
settings. Refer to the Password Setup Section, page 39,
for more information.
2. Press the Menu button on the remote to navigate to the
Main Menu.
Use the arrow buttons on the remote to select the Key Lock
3.
Setup feature (see Figure 1), and press ENTER.
4. Press the plus or minus buttons on the remote to turn the
Lock feature ON (see Figure 2).
5. Press the plus or minus buttons on the remote again to turn
the Lock feature to OFF.
6. To save your changes and return to the Main Menu, press
the Menu button.
7. You may notice there is no password prompt after you
initially set the Key Lock mode. You will need to turn
the DVR off and restart the system before you receive a
password prompt to access the Menu Selection mode.
AngelTrax | 43
1
2