AngelTrax ATCF460 MDVR Quick Setup Manual page 25

On-Screen Display Diagram (Cont.)
Indicator Features
8 Date and Time
9 Record Status
10 Record Mode
11 Heading (Available
only with the use of
GPS-E1 antenna)
12 Speed (Available
only with use of
GPS-E1 antenna)
13 GPS Coordinates
(Available only with
use of GPS-E1
antenna)
14 Other Signals
AngelTrax | 18
Description
Current or recorded date and time. Date and time can be automatically updated using
GPS technology. Automatic date/time update is only available if used in combination with
a GPS-E1 antenna.
REC = Unit is recording. If REC is not present, unit is not recording. The area between
Door Signal and the date/time display will show the MDVR status. If a camera connection
is lost, a 'LOSS' message will display above the date/time line.
CON = Continuous record. Continuous record is the default setting. To change the record
mode, select Record Setup > Record Mode. See the Record Setup Section, page 32.
H: - Shows heading direction (North, South, East or West).
0MPH displays the miles per hour the vehicle is currently traveling.
If a GPS-E1 antenna is installed, the vehicle's latitude and longitude is displayed on the
local monitor. When your recorded video data is reviewed with AngelTrax playback software,
each channel is marked with your vehicle's tracking information.
TL: Turn left displays on local monitor and in playback (flashes).
TR: Turn right displays on local monitor and in playback (flashes).
BR: Brake displays on local monitor and in playback.
AL: Amber lights display on local monitor and in playback (flashes).
SA: Stop arm displays on local monitor and in playback. The SA signal switches from
VSM™ to camera three in applications where four cameras and VSM™ is required, and
also in applications that require eight cameras and VSM™.
BU: Back up/reverse displays on local monitor and in playback.
SB: Service brake
PB: Parking brake
HL: Headlights
HR: Horn
BL: Bell
FW: Forward
EM: Emergency