AngelTrax ATCF460 MDVR Quick Setup Manual page 35

Camera Setup (Cont.)
Adjust the Sensitivity of the Motion Detection setting by
8.
pressing the plus or minus buttons on the remote.
9. The Sensitivity options range from one to four. One is the
most sensitive setting, and four is the least sensitive setting
(see Figure 9).
10. Use the plus or minus buttons on the remote to turn the
Relay Out feature ON or OFF (see Figure 10).
11. The Relay Out feature is used for connecting an
external alarm.
12. After adjusting the Motion Detection settings, press the
Menu button on the remote to save your changes, and
return to the Camera Setup menu. Press Menu again to
return to the Main Menu.
AngelTrax | 28
9
10