Factory Default Settings - AngelTrax ATCF460 MDVR Quick Setup Manual

Hide thumbs

Table Of Contents

Table of Contents

Date/Time Setup (Cont.)

If your unit has a Global Positioning System (GPS) antenna,

you may set the unit to automatically adjust the time with GPS

satellites. At the Date/Time Setup menu, use the arrow buttons

on the remote to select the Time Zone Setup feature, and press

ENTER. At the Time Zone Setup menu, turn the Auto Time

Adjust By GPS feature ON using the plus or minus buttons on

the remote. Use the arrow buttons on the remote to highlight

the UTC (Coordinated Universal Time), and set to your time

zone using the plus or minus buttons. As you scroll through the

selections, different time zone regions will appear for reference.

Select the Menu button to save the settings, and return to the

Date/Time Setup menu. Press Menu again to return to the

Main Menu.

Vehicle ID Type and Number

Select Sub Menu from the Main Menu using the arrow buttons

on the remote, and press ENTER. At the Sub Menu, use the

arrow buttons on the remote, to navigate to the DVR ID menu,

and press ENTER.

At the DVR ID menu, you will have the following options: ID Type

and ID.

Select ID Type and press the plus or minus button on the remote

to scroll through the ID Type options. These options include: Bus,

ID, Train and Taxi. Select the desired option and press ENTER.

Select the ID option using the arrow buttons on the remote. Edit

each digit by pressing the plus or minus buttons on the remote.

There are eight digits, and available options are A through Z and

zero through nine for each digit.

After setting adjustments have been made, press the Menu

button on the remote to save your changes and return to the

Sub Menu. Press Menu again to return to the Main Menu. Press

Menu again if you wish to return to the live camera view.

NOTICE: When the vehicle type is changed, the signal wire labels

will change. Please refer to the Driver Action-detecting per

Vehicle Table, page 13, for more information.

AngelTrax | 5

HDD (CF Card) Format

The ATCF460 DVR records data and mobile surveillance footage

onto a Compact Flash card. For the purposes of working with the

ATCF460 user menu, this manual may refer to the Compact Flash

card as the DVR's hard drive or HDD.

To format the CF card, use the arrow buttons on the remote to

select HDD Setup from the Main Menu, and press ENTER.

Use the arrow buttons on the remote to select HDD Format from

the HDD Setup menu and press ENTER.

At the HDD Format menu, use the arrow buttons to scroll down

to the Run option (located beside the Confirm option). Press

ENTER on the remote to select the Run option. At the bottom of

the HDD Format screen, a Format message will appear to show

formatting is in progress.

After the CF card is formatted, a Format OK message will appear

at the bottom of the HDD Format screen. The Compact Flash

card is now reset and enabled for recording.

The system will return to the camera view and record

(REC) mode.