Table of Contents
Advertisement
Peripheral Setup (Cont.)
Password Setup
1.
From the Peripheral Setup menu, use the arrow buttons on
the remote to select the Password Setup feature (see Figure
10), and press ENTER.
2.
At the Password Setup menu, enter the factory default
password (6666) (see Figure 11), using the numbered
buttons at the bottom of the remote, and press ENTER.
3.
You will be at the Change Password menu which has two
options: New and Confirm (see Figure 12).
Under the New option, use the numbered buttons at the
4.
bottom of the remote to enter your password.
5.
Under the Confirm option, enter your password again and
press ENTER. You will automatically be returned to the
camera view screen.
6.
Contact the AngelTrax corporate office if you lose your
password at 1.800.673.1788.
AngelTrax | 39
10
11
12
Hide quick links:
Advertisement
Table of Contents
