Table of Contents
Advertisement
Post-Installation Checklist
Please use the following checklist to ensure that your mobile DVR has been installed properly and that all functionality is working correctly.
Start vehicle
Plug in video/audio monitor
Make sure all lights on panic event button are working
Program time, date and vehicle number (Unit with GPS: select time, time zone & turn on)
Make sure GPS is displaying coordinates on screen (if applicable)
Push panic event button
Make sure DVR is secure and neatly installed
Make sure all cameras are aimed properly for desired capture
Test audio
Push brake to make sure lights work outside, on monitor and driver's monitor
Turn on amber lights. Check outside and on monitor. Open door and make sure red lights on stop arm and stop sign are
working outside and that stop arm shows up on monitor and driver's monitor (if applicable)
Disconnect monitor
Lock DVR
Check radio and PA system
Check 2-way radio
Check all switches on vehicle control panel (fans, lights, etc)
Make sure dip (delay time) switches are in the correct position
Check for missing screws. Make sure panels are installed properly with no cracks in plastic
Make sure camera grommets/wire loom are in place
AngelTrax | 8
Hide quick links:
Advertisement
Table of Contents
