Firmware Upgrade Section - AngelTrax ATCF460 MDVR Quick Setup Manual

Firmware Upgrade
1. The upgrade will be on a Compact Flash (CF) card provided
by AngelTrax™. Place the card into the CF port (see
Figure 1).
2. Use the black/gray remote provided, and press Menu.
3. Use the arrow buttons on the remote to scroll down to
Sub Menu (see Figure 2).
Press ENTER.
4.
5. Use the arrow buttons on the remote to scroll down to
Update Code (see Figure 3).
6. Press ENTER.
7. Use the arrow buttons to scroll down to Firmware
Upgrade-CF (see Figure 4).
Press the plus sign to change NO to YES.
8.
Press ENTER.
9.
10. The program will begin running. After it has finished, the
DVR will reboot itself or ask you to restart the unit.
AngelTrax | 45
CF Port
1
ATCF 460
2
3
4