Table of Contents
Advertisement
Sub Menu
CAUTION: It is not suggested that the following settings be adjusted. Settings should be left at their
factory default. Altering these values could result in poor or inaccurate performance.
From the Main Menu list, select Sub Menu (see Figure 1) using
the arrow buttons on the remote, and press ENTER.
There are seven settings under the Sub Menu feature. Depending
on your system features, adjustable settings include: GPS, G
Sensor, PTZ, DVR ID, Factory Default, Update Code and Audio
(see Figure 2).
GPS (Optional Feature)
Select GPS from the Sub Menu by pressing ENTER on the
1.
remote (see Figure 2).
2.
Do not change the Baud Rate feature from the factory
default of 9600 (see Figure 3).
3.
Use the arrow button on the remote to navigate to the
Speed Limit feature. Press the plus or minus buttons on the
remote to adjust the Speed Limit setting (see Figure 4).
Speed Limit feature (see Figure 4): If the vehicle exceeds
4.
the preset speed limit, the system will create an "Over
Speed" event. This event will display on the
playback software.
5.
To save your changes and return to the Sub Menu, press the
Menu button on the remote. Press the Menu button again to
return to the Main Menu.
AngelTrax | 40
1
2
3
4
Hide quick links:
Advertisement
Table of Contents
