Section 4: ATCF460 Connections, Ports and Controls
This section details the connections and ports on the ATCF460 DVR and their functions.
5
3
1.
AUDIO/VIDEO OUTPUT CONNECTION
•
Audio and video output for onboard monitor
(A/V "Y" cable)
2.
CAMERA INPUT PORT
•
Camera connection cables connect to this port
•
The ATCF460 system has 4 A/V channels (1-4)
3.
G-FORCE RECEIVER (Optional Feature)
•
Connect the G-Force sensor to this port
•
Detects changes in G-Force such as sudden stops
or collisions
4.
GPS RECEIVER (Optional Feature)
•
GPS antenna connection
5.
MILE/KM SELECT SWITCH
•
Allows user to select the mile or kilometer setting
6.
PANIC BUTTON CONNECTION
•
The external signal button (or "PANIC" button) can be
connected to show DVR status without using a video
monitor. This button has the following functions:
a.
Power indicator LED
b.
Record indicator LED
c.
GPS signal indicator LED
d.
'PANIC' button for emergencies
7.
POWER CONNECTION
•
Connects the key on the connection wire (yellow) to
vehicle ignition ON position
•
Plugs the power cord to the battery (red)
•
Connects to the common vehicle ground (black)
AngelTrax | 12
10
9
6
4
8
1
8.
DELAY TIME SWITCH
•
Allows user to record after the vehicle has been shut off.
Switch 1 is used to bypass the ignition, and the unit will
•
not shut off
Switch 2 delays by 5 minutes
•
•
Switch 3 delays by 10 minutes
•
Switch 4 delays by 20 minutes
Switch 5 delays by 30 minutes
•
•
Switch 6 delays by 240 minutes
•
If all the switches are off, the delay is five seconds.
•
See the Delay Time Switch Illustration, page 13.
9.
DRIVER ACTION-DETECTING WIRE CONNECTION
•
Sensor record cable connection has eight (8) wires:
a.
AL - Amber lights ON (gray wire)
b.
BR - Brake ON (red wire)
c.
BU - Reverse (blue wire)
d.
SA - Stop arm extended (white wire)
e.
RT - Right turn (green wire)
f.
LT - Left turn (yellow wire)
g.
D:1 - Door 1 (purple wire)
h.
D:2 - Door 2 (orange wire)
See the Driver Action-detecting per Vehicle Table, page
•
13, for details on each wire's function on different types
of vehicles
10.
EXPANSION PORT
•
Alarm expansion: up to four (4) inputs and
one (1) output
7
2