Table of Contents
Advertisement
Section 6: Factory Default Settings
CAUTION: The following section describes how factory default settings can be adjusted. However, it is
NOT RECOMMENDED that these settings be altered. Please contact technical support at the AngelTrax
corporate office regarding any questions or concerns you might have at 1.800.673.1788.
Camera Setup
1.
From the Main Menu, select Camera Setup (see Figure 1) by
pressing the ENTER button on the remote.
There are four settings under Camera Setup that may be
2.
adjusted for each camera. The settings include: Title Setup,
Color Setup, Motion Detection and Status Select (see
Figure 2).
Title Setup
3.
From the Camera Setup menu, select the Title Setup option
(see Figure 2) using the arrow buttons on the remote, and
press ENTER.
4.
Select the camera number you want to edit (across from
CAM) by pressing the plus or minus buttons on the remote.
Edit the Title (under CAM), by pressing the plus or minus
buttons for that camera number. The Title can have up
to four figures. You may choose letters, numbers or a
combination of both (see Figure 3).
5.
After the Title Setup is adjusted, press the Menu button on
the remote to save your changes and return to the Camera
Setup menu. Press Menu again to return to the Main Menu
if your adjustments are completed.
AngelTrax | 25
1
2
3
Hide quick links:
Advertisement
Table of Contents
