AngelTrax ATCF460 MDVR Quick Setup Manual page 53

Firmware Upgrade (Cont.)
After the DVR has rebooted, you will need to reformat the CF
card.
1. Press Menu.
2. Use the arrow buttons on the remote to scroll down to
HDD Setup (see Figure 5).
Press ENTER.
3.
4. Use the arrow buttons on the remote to scroll down to
HDD Format (see Figure 6).
Press ENTER.
5.
Use the plus button on the remote to select RUN
6.
(see Figure 7).
7. Press ENTER.
8. The CF card will format and return to recording
when finished.
AngelTrax | 46
NOTICE - FORMATTING THE MDVR'S
CF CARD:
Formatting will ERASE ALL INFORMATION ON THE
COMPACT FLASH CARD. If you have any information
you need off the card, be sure to retrieve it first.
5
6
7