Exiting And Saving - Fujitsu DL3700 Pro User Manual

<TEAROFF>

EXITING AND SAVING

User's Manual
#05 Chapter 5
2. Select the CONFIG function.
Repeatedly press the LOCK button to position the red cursor
under CONFIG. Press the FONT button to select the CONFIG
function and print the following <TEAROFF> options:
MANUAL AUTO
3. Select an option.
Press the LOCK button to move the cursor to either MANUAL
or AUTO. Press the FONT button to select the option and
print the <TEARPOS> item. If other items must be specified,
do so now. Otherwise, go to step 4.
4. Exit the CONFIG function.
Press the ONLINE button to exit the CONFIG function and
reprint the <<FUNCTION>> menu.
5. Do either of the following:
• Select another function, or
• Exit setup mode, saving your changes.
For details on other functions, see the other sections in this
chapter. To exit setup mode and save your changes, make sure
that the red cursor is positioned under SAVE & END, then
press the FONT button or the MENU button.
.
This section describes how to exit set up mode save any changes you
made:
To exit setup mode immediately, select the SAVE & END function.
43
USING SETUP MODE
11.08.1998, 23:03 Uhr
5 - 4 3