Fujitsu DL3700 Pro User Manual page 113

User's Manual
#05 Chapter 5
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
MENU2 Items
<WIDTH>
(*6)
<ZEROFNT>
(*3)
<DC3-CDE>
(*5)
<CR-CODE>
25
Options Description
13.6 IN 13.6-inch page width
11.4 IN 11.4-inch page width
11.0 IN 11-inch page width
8.0 IN 8-inch page width
Specifies whether to print the number
zero with a slash. This is useful to
distinguish the capital letter "O"
from the number "0".
Invalid for some soft fonts.
NO-SLSH 0
SLASH 0 /
ENABLE Enables the DC1 and DC3 codes.
Any data received between DC3 and
the next DC1 is ignored.
DISABLE Disables the DC1 and DC3 codes.
These codes are then ignored.
CR ONLY No line feed is added to a carriage
return.
CR & LF A line feed is added to each carriage
return.
11.08.1998, 23:03 Uhr
USING SETUP MODE
5 - 2 5