Fujitsu DL3700 Pro User Manual page 179

Approx. 4.7 mm (0.18 inches):
Resume printing is allowable
to single-part paper only and
selectable by setup mode.
User's Manual
#B Appendix B
102-266.7 mm (4-10.5 in)
102 mm
(4 inches)
or more
5.08-25.4 mm (0.2-1 in)
for 80-column printer
5.08–32 mm (0.2–1.3 in)
for 136-column printer
7
PRINTER AND PAPER SPECIFICATIONS
for 80-column printer
102–420 mm(4–16.5 in)
for 136-column printer
Print area
Perforation
Print area
Printing
resumable
Paper end
5.08 mm or more
(0.2 inch or more)
Print area for continuous forms
11.08.1998, 23:03 Uhr
25.4 mm (1 inch)
May be
decreased to
4.23 mm
(1/6 inch).
However, line
spacing may be
uneven.
25.4 mm (1 inch)
25.4 mm (1 inch)
Print head position when
paper end is detected,
selectable by setup mode.
Approx. 80 mm (3.2 inches)
for push-tractor feed
Approx. 35 mm (1.4 inches)
for pull-tractor feed
Print area may be off the
paper, depending on
paper setting or width.
B - 7