User's Manual
#07 Chapter 7
Table 7.3 Operating Problems and Solutions (Cont.)
Problem
The printer is on
but it will not
print (continued). your software or computer are the same as the
The cut sheet
feeder does not
operate.
The double-bin
adapter does not
operate.
9
TROUBLE-SHOOTING
Solution
If you are using an RS-232C serial interface,
make sure that the serial settings required by
settings on the printer. See the section Chang-
ing Hardware Options in Chapter 5.
Make sure that the cut sheet feeder is firmly
mounted on the printer.
Open the front cover and make sure that the
third stud from the left on the printer bottom
frame projects.
Make sure that the double-bin adapter is firmly
mounted behind the cut sheet feeder.
Open the front cover and make sure that the
fourth stud from the left on the printer bottom
frame projects.
11.08.1998, 23:03 Uhr
7 - 9