Overview Of Setup Mode - Fujitsu DL3700 Pro User Manual

USING SETUP MODE

OVERVIEW OF SETUP MODE

<<FUNCTION>>
SAVE&END MENU1
V-ALMNT
5 - 4
#05 Chapter 5
The initial printout contains a header, help menu, and <<FUNC-
TION>> menu. The header tells you that the printer is offline and in
setup mode. The help menu provides a quick summary of how to use
setup mode. The <<FUNCTION>> menu lists all of the functions
available to you in setup mode. Note that the red cursor on the
plastic print guide is initially positioned below the SAVE & END
function.
Setup mode can also be entered by turning off the printer, then
turning the printer back on while pressing the FONT and MENU
buttons simultaneously until the printer beeps.
When you enter setup mode, the following <<FUNCTION>> menu is
printed:
MENU2 HARDWRE ADJUST CONFIG
Table 5.1 summarizes the purpose of each function.
Table 5.1 Setup Mode Functions
Function
SAVE & END
MENU1 and
MENU2
HARDWRE
ADJUST
CONFIG
4
DEFAULT LIST SELF-TST
Purpose
Exits setup mode and saves any changes made
while in setup mode.
Assigns print features to MENU1 and
MENU2 on the printer control panel.
Changes the printer hardware options.
Changes the print position adjustment options.
Changes the configuration options.
11.08.1998, 23:02 Uhr
HEX-DUMP
User's Manual