Removing Printed Pages; Removing Single Sheets; Removing Continuous Forms - Fujitsu DL3700 Pro User Manual

REMOVING PRINTED PAGES

User's Manual
#04 Chapter 4
To resume printing when the AREA OVER indicator is on:
1. Stop your software and press the ONLINE button to place the
printer offline.
2. Adjust the horizontal position of the paper or change the
margin settings in the printer setup menu or your software.
3. Press the ONLINE button to place the printer online. Restart
the software from the page that includes the lost data.
This section describes the best methods for removing single sheets or
continuous forms paper after printing.

Removing Single Sheets

When you print using software, the printer automatically ejects each
sheet of paper when the end of the printed page is reached. To eject
sheets manually, use one of the following methods:
• Press and hold down the LF/FF button to execute a form feed,
or
• Turn the platen knob clockwise.

Removing Continuous Forms

To avoid wasting paper, use the printer tear-off function to remove
continuous forms paper. Press the TEAR OFF button to advance the
perforation to the tear-off edge. Tear the paper off, and then press
any button to retract the paper back to the top-of-form position. See
Chapter 3 for more detailed instructions.
9 11.08.1998, 23:02 Uhr
PRINTING
PRINTING
4 - 9