Resuming From A Paper-Out - Fujitsu DL3700 Pro User Manual

User's Manual
#04 Chapter 4
To resume printing, press the ONLINE button again. To cancel
printing, use the cancel commands provided by your software or
computer. To clear the print buffer, place the printer offline and press
the LOCK and FONT buttons. Any data sent to the print buffer
before you canceled printing will be lost.

Resuming from a Paper-Out

The printer can "sense" when paper runs out. Depending upon how
PPR-OUT (paper-out) is set in setup mode, the printer either:
• Stops printing and lights the red PAPER OUT indicator, or
• Continues printing until no more data remains in the printer.
See Chapter 5 for details on setting PPR-OUT. The factory default is
to stop printing if continuous forms paper runs out and to continue
printing if single sheet paper runs out.
When the cut sheet feeder runs out of paper, the printer always stops
printing, regardless of the PPR-OUT setting.
To resume printing when paper runs out, use either of the methods
described below:
Printing the remaining lines on a page
This method is convenient to continue printing under the paper-out
condition, but is not available when the cut sheet feeder is used.
1. Press the ONLINE button. The printer returns to online mode,
prints or feeds one line, and the PAPER OUT indicator lights
up again.
2. Repeat this procedure until the full page is printed. Line
spacings, however, may be uneven.
7 11.08.1998, 23:02 Uhr
PRINTING
PRINTING
4 - 7