Changing Hardware Options - Fujitsu DL3700 Pro User Manual

CHANGING HARDWARE
OPTIONS
User's Manual
#05 Chapter 5
The HARDWRE function defines the printer's hardware operating
conditions. If you are using the optional RS-232C serial interface, the
serial interface options must be set properly for the printer to function
correctly with your system hardware.
Table 5.4 describes the HARDWRE items and options . Items are
listed in the order in which they are printed. The procedure for
changing the hardware options is described after Table 5.4.
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
<PPR-OUT>
29
Table 5.4 HARDWRE Items and Options
Options
Specifies how the printer responds
when you run out of paper.
CNTONLY The printer detects paper-out only
for continuous forms. Printing stops
and the PAPER OUT indicator lights
red.
DETECT The printer detects paper-out for
both continuous forms and single
sheets. Printing stops and the
PAPER OUT indicator lights red.
IGNORE The printer ignores paper-out for
both continuous forms and single
sheets. Printing continues until no
more data remains. No PAPER
OUT warning is displayed.
NOTE: For cut sheet feeders,
printing stops and the PAPER OUT
indicator lights red, regardless of
the PPR-OUT setting.
11.08.1998, 23:03 Uhr
USING SETUP MODE
Description
5 - 2 9