Changing Head Gap Adjustment Options; Exiting And Saving - Fujitsu DL6400Pro User Manual

Changing Head Gap Adjustment Options

Changing Head
Gap Adjustment
Options
GAP-ADJ item Options
<AMOUNT>
AUTO
1-PLY
2-PLY
3-PLY
4-PLY
5-PLY
6-PLY
7-PLY
8-PLY
POS.A
POS.B
POS.C
POS.D
MANUAL
<==END==>
Exiting and
Saving
8-36
The GAP-ADJ function adjusts the gap between the print head and the
paper. This function is displayed only when the automatic paper
thickness control (APTC) feature is built in.
Table 8–7 GAP-ADJ option
Description
Specifies the print head gap.
The print head gap is set automatically.
Select one to eight-ply paper and auxiliary positions
A, B, C, or D.
Adjust the head gap using the paper thickness lever.
Indicates item termination.
Exit setup mode and save any changes either by exiting setup mode
immediately and selecting SAVE&END or by printing before exiting
setup mode, selecting SELF-TST, and pressing ONLINE.
Either way, changed settings are saved as the printer's new default
settings. These new default settings remain active until they are
changed.
User's Manual