Fujitsu DL3700 Pro User Manual page 120

USING SETUP MODE
5 - 3 2
#05 Chapter 5
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
<BAUD-RT> 150
300
600
1200
2400
4800
9600
19200
<PROTOCL>
XON/XOF
DTR
REV-CHL
<DSR> IGNORE
DETECT
<DUPLEX> FULL
HALF
<CTS> IGNORE
DETECT
<CD> IGNORE
DETECT
<CSFTYPE>
ASF
PAPRPRO
<==END==>
32
Options Description
The baud rate is in bps (bits per
second). Select the same baud rate as
used by your computer or modem.
Indicates data transmission protocol.
The DC1 and DC3 codes are used.
The Data Terminal Ready signal is used.
The Reverse Channel signal is used.
DSR is ignored by the printer.
DSR is detected by the printer.
Simultaneous data transmission occurs
in opposite directions.
Data transmission occurs in either
direction, but not simultaneously.
CTS is ignored by the printer.
CTS is detected by the printer.
CD is ignored by the printer.
CD is detected by the printer.
Selection of cut sheet feeder type
CSF made by BDT.
CSF made by Rutis Hauser.
Indicates the end of the HARDWRE
item list. Press the FONT button to print
the first item, which is <PPR-OUT>.
Press the MENU button to print the
previous item. Press the ONLINE button
to reprint the <<FUNCTION>> menu.
11.08.1998, 23:03 Uhr
User's Manual