Connecting The Camcorder To Devices Using The Cbk-Wa101 Wireless Adapter; Attaching The Cbk-Wa101 - Sony PXW-X320 Operating Instructions Manual

2
Launch the browser and input http://
<camcorder's IP address> (setting of
MAINTENANCE > Network Setting >
IP Address in the setup menu)/rm.html
in the address bar.
Example: When the IP address is
192.168.1.10, input http://192.168.1.10/
rm.html in the address bar.
The Wi-Fi Remote screen will appear on the
device screen when the connection is
established.
Thereafter operate the camcorder as shown
on the screen of the Wi-Fi connected device.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• To display the page for a smartphone, change the page
to "rms.html." To display the page for a tablet device,
change the page to "rmt.html." Normally, when
"rm.html" is entered, the page displayed switches
automatically for the device. However, in some cases,
a different page may be displayed, depending on the
device.
• The camcorder status may not match the Wi-Fi
Remote screen in the following cases. If this happens,
reload the browser display.
- when the camcorder is restarted while the connection
is established.
- when the camcorder is controlled directly while the
connection is established.
- when the device is reconnected.
- when you operate forward/backward on the device's
browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote control
may not work properly.
• Your smartphone/tablet may not be compatible with
the ad hoc mode. For details, refer to the operating
instructions supplied with the smartphone/tablet.
Connecting the
Camcorder to Devices
using the CBK-WA101
Wireless Adapter
You can connect a device (such as a computer,
smartphone, or tablet, collectively referred to as
"device") to the camcorder over a wireless LAN
connection by attaching an optional CBK-
WA101 Wireless Adapter.
The following operations are supported between
the camcorder and devices connected by wireless
LAN using the CBK-WA101.
• Using the Web menu (page 83)
• Transferring planning metadata between the
camcorder and a device (page 83)
• Camcorder remote operation using a device
(page 84)
• Proxy file (low resolution) recording (page 86)
• File transfer (page 86)
• Monitoring (page 86)
• High-quality streaming using Sony QoS
technology (page 86)
• Using the "Content Browser Mobile"
application (page 86)
In addition to the operations above, the
following operations are also supported using
the "Content Browser Mobile" application.
- Partial transfer of proxy files and original
files.
- Live logging function

Attaching the CBK-WA101

For details about attaching the optional
CBK-WA101 Wireless Adapter, refer to the
Operating Instructions or Installation Manual of
the CBK-WA101.
Notes
• Turn the camcorder off before attaching or removing
the optional CBK-WA101 Wireless Adapter.
• The IFU-WLM3 cannot be used when using an
CBK-WA101.
• If you use another wireless device near the camcorder,
the camcorder may not work correctly. Turn any
wireless devices off that are near the camcorder.
85