Sony PXW-X320 Operating Instructions Manual page 151

MAINTENANCE
Item
Camera Config
Makes settings related to
various camcorder
operations.
Sub-item Setting
On/Off
Rec Tally Blink
3sec/10sec/Clip
Rec Review
SDI Rec Control Off / Remote I/F /
Para Rec
HD SDI Remote Chara/G-Tally/
I/F R-Tally
Match Clip On/Off
Name
ALAC AUTO/OFF
Normal/Local
CCU Operation
Description
Turns warning flashes by the TALLY
indicator on/off. The warnings alert you
an almost exhausted battery pack or low
remaining media capacity.
Selects the recording review time.
Clip: Review all of the most recently
recorded clip.
Sets the function that enables
synchronized recording with this
camcorder.
Remote I/F: To feed a REC trigger
signal to a recorder connected to
the SDI OUT connector.
Para Rec: Performs the recording
controls by interlocking to the
camcorder's recording operation.
Selects the indication that shows
whether the external device is recording
when "SDI Rec Control" is set to
"Remote I/F."
Chara: Indicate by the external device
control indication on the
viewfinder screen.
G-Tally: Indicate by the green tally
indicator on the viewfinder screen.
R-Tally: Indicates by the recording
mode/operation status indication
on the viewfinder screen.
Note
When "SDI Rec Control" is set to "Para
Rec," "Chara" is set automatically and this
item is grayed out.
Sets whether to add the clip name
information to the SDI output.
Sets the ALAC (automatic lens
aberration correction) function.
AUTO: The ALAC function is set to on
when a compatible lens is attached.
OFF: Does not use the ALAC function.
Enables switch operations for the inside
panel when the camera adaptor is
mounted.
Notes
• If you change the switch operation
setting of the camcorder, the camcorder
will restart automatically.
• When main unit switch operation is
enabled, display of the CCU remote
controller and display of return videos
and tally and call operations from the
CCU are enabled, but remote control via
the CCU or via the REMOTE connector
is disabled.
151