Sony PXW-X320 Operating Instructions Manual page 127

OPERATION
Item
Assignable SW
Assigns functions to
assignable switches.
For details about assigning
functions, see "Assigning
Functions to Assignable
Switches" (page 164).
VF Setting
Makes settings related to
the viewfinder screen.
Sub-item Setting
0 to 20 to 99
Zoom Speed
Color –99 to ±0 to +99
Color/B&W
Mode
Peaking Type Normal/Color/Both
Peaking Normal/High
Frequency
White/Red/Yellow/
Peaking Color
Blue
Peaking Level Low/Mid/High
DXF Rec Tally Upper/Both
Description
When Zoom has been assigned to the
ASSIGNABLE 4 or 5 switch, specifies
the zoom speed.
Note
When the lens supplied with the PXW-
X320 is used, zooming may not operate
smoothly if the zoom speed is low.
Adjusts the density of the colors
displayed in the viewfinder screen.
Selects "Color" or "B&W" as the
display mode of the viewfinder screen.
(Even when "B&W" is selected, some
indications are always displayed in
color. Examples include tally
indications, thumbnails, and the skin
gate area.)
Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: Both
Selects normal or high peaking
frequency.
When "Peaking Type" is set to "Color,"
selects the peaking color.
When "Peaking Type" is set to "Both,"
selects the color peaking level.
When a separately sold viewfinder is
installed, specified whether to light the
tally indicator on the upper side only
("Upper"), or on both the upper and
lower sides ("Both").
127