Sony PXW-X320 Operating Instructions Manual page 149

MAINTENANCE
Item
WRR Setting
Makes settings related to
the wireless tuner.
Sub-item Setting
All/CH1
WRR Valid CH
Sel
WRR CH Select TX1/TX2
WRR Delay On/Off
Comp
TX ---
TX Audio Peak ---/Peak
TX Input Level ---/Mic/Line
TX ATT Level ---
TX LCF Freq ---
Auto/0.0ms to 8.0ms Specifies the amount of audio delay.
TX System
Delay
Description
Selects whether to enable channels 1
and 2 of the wireless receiver ("All") or
channel 1 only ("CH1").
Specifies the target channel for other
sub-items.
TX1: Channel 1
TX2: Channel 2
Enables ("On") or disables ("Off")
delay compensation for wireless audio
input. (When "On" is selected, the audio
in all E-E output is delayed by about 8
ms.)
Displays the name of the transmitter
whose signals are being received on the
channel selected by "WRR CH Select."
Displays whether the AF level of the
transmitter whose signals are being
received on the channel selected by
"WRR CH Select" are over peak.
Displays whether the input level of the
transmitter whose signals are being
received on the channel selected by
"WRR CH Select" is set to microphone
("Mic") or line ("Line").
Sets the ATT level of the transmitter
whose signals are being received on the
channel selected by "WRR CH Select."
(The setting range varies depending on
the transmitter.)
Sets the low cut filter frequency of the
transmitter whose signals are being
received on the channel selected by
"WRR CH Select." (The setting range
varies depending on the transmitter.)
Auto: Automatically adjusts the
amount of delay so that the delay in
the audio received from the
wireless transmitter is zero.
0.0ms to 8.0ms: Sets the amount of
anticipated wireless system delay,
for cases in which several wireless
systems are being used over a
devices such as an audio mixer.
149