Functions That Can Be Assigned To The Assign. 2 Switch; Functions That Can Be Assigned To The Assign. 1 And 3 Switches; Button - Sony PXW-X320 Operating Instructions Manual

Functions That Can Be Assigned to the ASSIGN. 2 Switch

Note
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the
switch at that point may not match the camcorder's internal state. After assigning a function, switch the ASSIGN. 2
switch or power the camcorder off and on again.
Assignable SW setting
Off
Front Mic
Marker
Picture Cache a)
Zebra
Clip Continuous Rec
b)
Digital Extender
a) When Picture Cache is assigned, "OPERATION" > "Rec Function" in the setup menu is disabled (grayed out) to
keep the setting unchanged.
b) When the digital extender function is turned on, it is not possible to show the return video.
Functions That Can Be Assigned to the ASSIGN. 1 and 3 Switches, the
ASSIGNABLE 4 and 5 Switches, and the COLOR TEMP. Button
Assignable SW setting
Off
Front Mic
Marker
Last Clip Delete
ATW
ATW Hold
EZ Mode
Turbo Gain
Rec Review
Rec
Picture Cache
Freeze Mix
Spotlight
Backlight
EVF Mode
BRT Disp
Histogram
Function
No assignment
Switch between stereo and monaural when a stereo microphone is connected.
Turns the display of all markers on/off.
Turn the picture cache function on/off.
Turn zebra display on/off.
Turn the Clip Continuous Rec mode on/off.
Turn the screen magnification function on/off when the optional CBK-CE01 50
Pin Interface and Digital Extender is installed.
Function
No assignment
Switch between stereo (On) and monaural (Off) when a
stereo microphone is connected.
Turns the display of all markers on/off.
Delete the most recently recorded clip.
Turn ATW (auto tracing white balance) mode on/off.
Hold the white balance setting in the ATW mode.
Execute EZ mode, according to the setting of
"OPERATION" > "TLCS."
Execute Turbo Gain according to the setting of
"OPERATION" > "Gain Switch" > "Gain Turbo."
Execute recording review.
Start or stop recording.
Turn the picture cache function on/off.
Execute the freeze mix function.
Turn the spotlight function in auto iris mode on/off.
Turn the backlight function in auto iris mode on/off.
Switch the viewfinder screen between B&W (On) and color
(Off).
Turn the display of the brightness level on/off.
Turn the histogram display on/off.
165
State when
camcorder is next
powered on
—
Setting retained
Setting retained
—
Setting not retained
—
Setting retained
Setting not retained
—
—
Setting retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained