Defining Shot Mark Names In Planning Metadata - Sony PXW-X320 Operating Instructions Manual

Clip name string example
Use a text editor to modify the two fields in the
<Title> tag that contain the clip name strings.
The shaded fields in the example are clip name
strings. "Typhoon" is described in ASCII format
(up to 44 characters). "Typhoon_Strikes_Tokyo"
is described in UTF-8 format (up to 44 bytes).
"sp" indicates a space and 3 indicates a carriage
return.
<?xml version="1.0"
sp sp
UTF-8"?>3
<PlanningMetadata xmlns="http://
sp
xmlns.sony.net/pro/metadata/
planningmetadata" assignId="
sp
P0001" creationDate="
sp
2011-08-20T17:00:00+09:00"
lastUpdate="
2011-09-28T10:30:00+09:00"
version="1.00">3
<Properties propertyId="
sp
assignment" update="
sp
2011-09-28T10:30:00+09:00"
modifiedBy="Chris">3
<Title usAscii="
sp
xml:lang="en">
</Title>3
</Properties>3
</PlanningMetadata>3
Notes
• When you create a file, enter each statement as a single
line with a CRLF only after the last character in the
statement line, and do not enter spaces except where
specified.
• Up to 44 bytes (or characters) string is available for the
clip name.
If the UTF-8 format string exceeds 44 bytes, 44 bytes
string is used as the clip name.
If only ASCII format name is specified, 44 characters
string is used as the clip name.
When neither an ASCII format name string nor UTF-8
format name string can be used, the standard format
clip name is used.
To set clip names
Load a planning metadata file that contains clip
names into this camcorder, select
"OPERATION" > "Clip" > "Auto Naming" (see
page 134) in the setup menu, then select "Plan."
Each time that you record a clip, the camcorder
automatically generates a name consisting of the
encoding="
sp
sp
sp
"
Typhoon
sp
Typhoon_Strikes_Tokyo
clip name defined in the planning metadata file,
with the addition of an underbar (_) and a four-
digit serial number (0001 to 9999).
Examples: Typhoon_Strikes_Tokyo_0001,
Typhoon_Strikes_Tokyo_0002, ...
Notes
• When the serial number reaches to 9999, it returns to
0001 with the next recording operation.
• When you load another planning metadata file, the
serial number returns to 0001.
Defining Shot Mark Names in
Planning Metadata
When you use planning metadata to set shot
marks, you can define names for Shot Mark 0 to
Shot Mark 9.
When you record shot marks, you can add the
shot mark name strings defined in the planning
metadata.
Note
Shot Mark 1 and Shot Mark 2 can be recorded on the
camcorder. Shot Mark 3 to Shot Mark 9 and Shot Mark
0 can be recorded by operation from a device which is
connected with the camcorder via wireless LAN.
Shot mark name string example
Use a text editor to modify the fields in the <Meta
name> tag.
The shaded fields in the example are essence
mark name strings. Names can be either in ASCII
format (up to 32 characters) or UTF-8 format (up
to 16 characters).
"sp" indicates a space and 3 indicates a carriage
return.
Note
If a name string contains even one non-ASCII character,
the maximum length of that string is 16 characters.
<?xml version="1.0"
sp
UTF-8"?>3
<PlanningMetadata xmlns="http://
xmlns.sony.net/pro/metadata/
planningmetadata"
H00123" creationDate="
sp
2011-04-15T08:00:00Z"
2011-04-15T15:00:00Z"
"1.00">3
<Properties propertyId=
sp
"assignment" class="original"
sp
99
encoding="
sp
assignId="
sp
lastUpdate="
sp
version=
sp
sp