Sony PXW-X320 Operating Instructions Manual page 123

Hide thumbs Also See for PXW-X320:
Table of Contents

Advertisement

OPERATION
Item
Format
Specifies the camcorder's
operating mode and
recording format.
Format Media
Executes a media format.
Input/Output
Makes settings related to
I/O signals.
Sub-item
Setting
16:9/4:3
Aspect Ratio
(SD)
Audio
24bit/16bit
Length(IMX)
Country
NTSC Area/NTSC(J)
Area/PAL Area
Media(A)
Execute/Cancel
Media(B)
Execute/Cancel
In FAT mode
HD&HDV/
Output& i.LINK
SD&HDV/SD&DV/
480P/576P
In UDF/exFAT
HD/SD/480P/576P
mode
Output
23.98P Output
PsF/Pull Down
Source Select
Camera/i.LINK
i.LINK I/O
Enable/Disable
On/Off
SDI Output
HDMI Output
On/Off
Description
Selects the SD mode aspect ratio
(execute using Execute).
Selects the audio bit rate for recording
in IMX format.
Selects the area of use (execute using
Execute).
Initializes the SxS memory card in slot
A (execute using Execute).
Initializes the SxS memory card in slot
B (execute using Execute).
Selects the signals output from the
video connectors and the i.LINK (HDV/
DV) connector.
When the HD/SD setting is SD,
"SD&DV" or "SD" is selected.
Selects whether to use progressive
output (PsF) or pulldown output (Pull
Down) when the video format is in the
following modes.
UDF/HD mode
HD22 50/1080/23.98P
HD420 HQ1920/1080/23.98P
HD420 HQ1440/1080/23.98P
exFAT/HD mode
XAVC-I/1080/23.98P
XAVC-L50/1080/23.98P
XAVC-L35/1080/23.98P
HD22 50/1080/23.98P
HD420 HQ1920/1080/23.98P
HD420 HQ1440/1080/23.98P
FAT mode
HQ 1920/1080/23.98P
HQ 1440/1080/23.98P
Selects whether to use the video camera
picture (Camera) or the signal input
from the i.LINK (HDV/DV) connector
(i.LINK) as the video input source.
Selects whether to enable or disable
input and output of signals via the
i.LINK (HDV/DV) connector.
When "Enable" is selected, you can
execute auto black balance adjustment
during i.LINK output. (When this
setting is set to "Enable," The flashband
reduce function is set to "Off.")
Turns on/off the output of signals from
the two HD/SD SDI OUT connectors.
When the camcorder is connected to a
computer via USB, set to "Off."
Turns on/off the output of signals from
the HDMI connector.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents