Sony PXW-X320 Operating Instructions Manual page 26

h Battery remaining/voltage display [M]
Type of power Indicator
source
InfoLithium Remaining battery capacity
battery icon and remaining recording
time
Anton Bauer Remaining battery capacity (%
battery indication)
Other type than Input voltage
above
i External power input
Appears when power is supplied from an external
power source connected to the DC IN connector.
j Network client mode status indicator/
Streaming status indicator [M]
Indicates the network client mode connection
status indicator and streaming status when an
optional CBK-WA101 Wireless Adapter is
connected.
Indicator Meaning
Network client mode connected
status
Network client mode connection
status (flashing)
Network client mode connection
error status
Streaming distribution idle state
Streaming distribution state
Streaming distribution error state
k ALAC (automatic lens aberration
correction) status [M]
Appears when "ALAC" (see page 151) of the
MAINTENANCE menu is set to "AUTO," and
an ALAC compatible lens is attached to the
camcorder.
l Color temperature [M] [D]
Displays a color temperature calculated from the
gain of R and B, in the range 1.5 K to 50.0 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the "Offset White" setting (see
page 133).
No display: "Offset White" is "Off."
+: The value of "Offset White" is greater than
3200K.
–: The value of "Offset White" is less than
3200K.
m Number of system lines [M]
Indicates the number of system lines (1080/720/
576/480) of video currently being recorded or
played back.
n Video format [M]
Indicates the video format (see page 45).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
DVCAM.
o Depth of field indicator (when the serial
lens is mounted) [M] [A]
Error/warning indicator
A bar indicates the depth of field. The display unit
is meters or feet, as selected on "OPERATION"
> "Display On/Off" > "Lens Info" in the setup
menu.
An error or warning message is displayed here
depending on the situation.
Under this area, you can also display the name of
the next clip to be recorded (see page 136).
p Special recording mode indicator [M]
The following is displayed when the camcorder is
in a special recording mode.
• Frame Rec (frame recording mode)
• Interval Rec (interval recording mode)
• S&Q Motion (Slow & Quick Motion mode)
q Special recording mode settings
indicator [M] (in Slow & Quick Motion
mode standby only [D])
Appears when the camcorder is in a special
recording mode.
26