Sony PXW-X320 Operating Instructions Manual page 150

MAINTENANCE
Item
Timecode
Makes settings related to
timecode.
Essence Mark
Makes settings related to
shot marks and clip index
picture thumbnails.
Sub-item Setting
Auto/Generator
TC Out
DF/NDF
DF/NDF
Fix/Time
LTC UBIT
Counter Display Counter/Duration
Ret Shot Mark 1 On/Off
Ret Shot Mark 2 On/Off
Index Picture Pos 0sec to 10sec
(in 1 sec steps)
Clip/Rec Start
Find Mode
Description
Selects the source for timecode output.
Auto: During recording, output values
generated by the timecode
generator, and during playback
output values obtained by the
timecode reader.
Generator: Output values generated
by the timecode generator during
both recording and playback.
When "Country" is set to other than
"PAL Area," selects drop-frame mode
("DF") or non-drop-frame mode
("NDF").
Specifies the data recorded in LTC user
bits.
Fix: Record user-specified data.
Time: Record the current time.
Select the method used to reset the
counter value displayed on the
viewfinder screen.
Counter: Continue to increment until
the RESET button is pressed.
Duration: Reset each time that
recording is started.
Specify whether to input Shot Mark1
marks using the RET button on the lens.
Specify whether to input Shot Mark2
marks using the RET button on the lens.
Specifies which frame to use as the clip
thumbnail image
Specify the frame to be cued up when
the PREV or NEXT button is pressed.
Rec Start: The next frame or the
previous frame where a Rec Start
essence mark is set.
Clip: Pressing the NEXT button moves
to the start frame of the next clip.
Pressing the PREV button moves
to the start frame of the current
clip. (Pressing the PREV button at
the start frame of the current clip
moves to the start frame of the
previous clip.)
150