Sony PXW-X320 Operating Instructions Manual page 146

MAINTENANCE
Item
Audio
Makes settings related to
audio.
Sub-item Setting
Front MIC Select Mono/Stereo
Audio CH3/4 Ch1/2 / Switch
Mode
Front MIC CH1 –70dB/–60dB/
Ref –50dB/–40dB/
–30dB/–20dB
Front MIC CH2 –70dB/–60dB/
Ref –50dB/–40dB/
–30dB/–20dB
Rear MIC CH1 –70dB/–60dB/
Ref –50dB/–40dB/
–30dB/–20dB
Rear MIC CH2 –70dB/–60dB/
Ref –50dB/–40dB/
–30dB/–20dB
Line Input Ref +4dB/0dB/–3dB/
EBUL
Off/Set
Min Alarm
Volume
Off/3dB/6dB/9dB/
Speaker
Attenuate 12dB
Headphone Out Mono/Stereo
Reference Level –20dB/–18dB/
–16dB/–12dB/EBUL
Reference Out 0dB/+4dB/–3dB/
EBUL
CH1&2 AGC Mono/Stereo
Mode
Mono/Stereo
CH3&4 AGC
Mode
AGC Spec –6dB/–9dB/–12dB/
–15dB/–17dB
Description
Selects whether the front microphone is
monaural ("Mono") or stereo
("Stereo").
Selects the input signals for the AUDIO
IN CH-3/CH-4 connectors.
Ch1/2: The same signals as the AUDIO
IN CH-1/ CH-2 connectors.
Switch: The signals selected with the
AUDIO IN CH-3/CH-4 switches.
Selects the reference level for channel 1
of the front microphone.
Selects the reference level for channel 2
of the front microphone.
Selects the reference input level when
the setting of the AUDIO IN CH1
switch is MIC.
Selects the reference input level when
the setting of the AUDIO IN CH2
switch is MIC.
Selects the reference input level when
the AUDIO IN CH1 and AUDIO IN
CH2 switches are set to LINE.
Selects the volume when the ALARM
knob is turned all the way down.
Off: Almost inaudible
Set: Fairly audible
Selects the volume from the monitor
speaker (does not affect earphone
volume).
Selects whether the earphones are
monaural ("Mono") or stereo
("Stereo").
Selects the output level of the 1 kHz test
signal.
Specifies the output level with respect
to the reference input level.
For automatic adjustment of the input
level of analog audio signals recorded
on channels 1 and 2, specifies whether
to make the adjustments separately for
each channel ("Mono") or in stereo
mode ("Stereo").
For automatic adjustment of the input
level of analog audio signals recorded
on channels 3 and 4, specifies whether
to make the adjustments separately for
each channel ("Mono") or in stereo
mode ("Stereo").
Selects the AGC saturation level.
146