Functions That Can Be Assigned To The Ret Button On The Lens - Sony PXW-X320 Operating Instructions Manual

Assignable SW setting
Electrical CC
CC5600K
Clip Continuous Rec
Slot Select
Digital Extender
a)
Flashband Reduce
Quick Backup
USB Thumbnail
a) When the digital extender function is turned on, it is not possible to show the return video.

Functions That Can Be Assigned to the RET Button on the Lens

Assignable SW setting
Off
Lens RET
a)
Return Video
Rec Review
Shot Mark1
Shot Mark2
Clip Flag OK
Function
Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance adjustment
values.
Each press of the switch or button switches in the order
t t
3200K 4300K 5600K
These can also be applied from a menu (apply with Electrical
CC<A><B><C><D>).
Note
This function is not available when "MAINTENANCE" >
"White Filter" >ND Filter C.Temp" in the setup menu is set to
"On."
If you set "ND Filter C.Temp" to "On" after assigning the
function, the assignable switch ceases to function.
Apply a 5600K electrical CC filter to white balance
adjustment values.
Turn the Clip Continuous Rec mode on/off.
When both slots A and B have recording media inserted in
them, select the media to use.
Turn the screen magnification function on/off when the
optional CBK-CE01 50 Pin Interface and Digital Extender is
installed.
Turn the flashband reduce function on/off.
Back up all the clips in the selected SxS card to a USB
media.
Display the thumbnail screen of a USB media.
Function
No assignment
Display return video signals when the optional CBK-CE01
is installed and a camera control unit is connected.
When a camera control unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review (if
playback is allowed).
Display return video signals when the optional CBK-CE01
is installed and a camera control unit is connected.
Execute recording review.
Write Shot Mark1.
Write Shot Mark2.
Add/clear an OK flag to/from the clip being recorded or
played.
t
6300K.
167
State when
camcorder is next
powered on
Setting retained
Setting retained
Setting retained
—
Setting not retained
Setting not retained
Setting not retained
Setting not retained
State when
camcorder is next
powered on
—
—
—
—
—
—
Setting not retained