Sony PXW-X320 Operating Instructions Manual page 126

OPERATION
Item
Rec Function
Makes settings related to
special recording modes.
Note
When Picture Cache is
assigned to an assignable
switch, this item is disabled
(grayed out).
Assignable SW
Assigns functions to
assignable switches.
For details about assigning
functions, see "Assigning
Functions to Assignable
Switches" (page 164).
Sub-item Setting
Interval Rec On/Off
Frame Rec On/Off
Number of The available settings
Frames vary depending on the
settings in "Format" >
"HD System Line and
Format" > "System
Frequency."
2frame/6frame/
12frame
1frame/3frame/
6frame/9frame
1/2/3/4/5/6/7/8/9/10/
Interval Time
15/20/30/40/50 (sec)
1/2/3/4/5/6/7/8/9/10/
15/20/30/40/50 (min)
1/2/3/4/6/12/24 (hour)
Off/2sec/5sec/10sec
Pre-Lighting
Simul Rec Simul/Off
<0> see page 164
<1>
<2>
<3>
<4>
<5>
RET
C. Temp
Description
Turns the Interval Rec function on/off.
(When this is set to "On," "Slow &
Quick," "Clip Continuous Rec,"
"Picture Cache Rec," and "Frame Rec"
are set to "Off.")
Turns the Frame Rec function on/off.
(When this is set to "On," "Slow &
Quick," "Clip Continuous Rec,"
"Picture Cache Rec," and "Interval
Rec" are set to "Off.")
When "Interval Rec" or "Frame Rec" is
set to "On," specifies the number of
frames to shoot in one Interval Rec or
Frame Rec take.
When "HD System Line" is set to
"720," and "System Frequency" is set to
"59.94P" or "50P."
When "HD System Line" is set to other
than "720", or "System Frequency" is
set to other than "59.94P" or "50P."
Set the interval for Interval Rec
shooting, when "Interval Rec" is set to
"On."
If you want the video light to be turned
on before Interval Rec shooting, select a
number of seconds before the start of
shooting. If you do not want it to be
turned on, select Off.
Sets whether to use the Simul Rec
function for recording simultaneously to
slot A and slot B.
Assigns function to ASSIGN. 0 switch.
Assigns function to ASSIGN. 1 switch.
Assigns function to ASSIGN. 2 switch.
Assigns function to ASSIGN. 3 switch.
Assigns function to ASSIGNABLE 4
switch.
Assigns function to ASSIGNABLE 5
switch.
Assigns function to RET button on the
lens.
Assigns function to COLOR TEMP.
button.
126