Table of Contents
Advertisement
2. Use the PC Utility to Convert the Image
1. Install the NR-300 PC Utility on your PC.
2. At your PC, start the NR-300 PC Utility. (Select Start, Programs, SHC PC
3. If you are starting the NR-300 PC Utility for the first time, you must define a store
4. Move the .bmp logos you wish to use into the store directory
5. At the PC Utility, choose Convert Logo Image from the Utility menu. The Bmp
6. Click FILE OPEN. Select the bitmap image you wish to use from the Open
7. Click the SAVE AS PRE IMG or SAVE AS POST IMG button.
8. When the image is selected, click OK. Verify that the message "Save As
3. Copy the Images to an SD Card
The PC Utility will create two image files:
They will be located in your PC at:
Copy the mages to the following path on your SD card:
Important: In the path: C:\NR-300PC\Store Name, the store name is the name you
have defined as the store in the PC Utility.
90 •
UTILITY, NR-300 PC UTILITY.) The Store Setting dialog box displays.
name, or if a store is already defined, you can select the store from the drop down
list. After the store is defined or selected, click Close. The PC Utility program
starts.
(i.e. C:\NR-300PC\storename.)
dialog box displays.
dialog and click the Open command button.
UserPre.Img" or "Save As UserPost.Img" displays. If the file is too large, and
cannot be loaded, the message "File Size Error" displays.
USERPRE.IMG
USERPOST.IMG
C:\NR-300PC\Store Name
SD\\N300\PgmBack\Store Name
SAM4s NR-300 Series Operator's & Programming Manual v.1.0
Advertisement
Table of Contents
