Installing The Vertical Stabilizer - Seagull Models Piper Cub Assembly Manual

Remove covering.

INSTALLING THE VERTICAL STABILIZER.

Pen.
www.seagullmodels.com
Epoxy
Hinge slot.
When cutting through the covering to re-
move it, cut with only enough pressure
to only cut through the covering itself. Cutting
into the balsa structure may weaken it.
Remove covering.
Put the vertical stabilizer into the in the top
of the horizontal fin. The bottom edge of the
stabilizer should also be firmly pushed against
the top of the horizontal stabilizer.
Horizontal 90º
Stabilizer.
C/A glue.
Vertical
Stabilizer.
Hinge.
Epoxy.
13