Aileron Control Horn Installation - Seagull Models SPACE WALKER II Assembly Manual

SPACE WALKER II
Plastic tape.
Repeat the procedure for orther wing
haft.

AILERON CONTROL HORN INSTALLATION

3x40mm.
1) Aileron control horn:
Mix a small amount of 30 minute epoxy and
lightly coat the inside of the hole in the aileron
and the control horn screw.
Wing.
drill hole
3.2mm.
Wing bottom.
14
Aileron electric.
2 sets.
Aileron.
Instruction Manual
Wing bottom.
M3 lock nut.
M3 nut.
Aluminium washer.
Aileron control horn.
Wing bottom.
75mm.
M2 clevis.
M2 lock nut.
M2 lock nut.
M3 control horn.
Wing bottom.