Seagull Models SPACE WALKER II Assembly Manual page 18

SPACE WALKER II
INSTALLATION PILOT.
2x8mm.
60mm.
Silicon glue.
Silicon glue.
Machine Screw 2 x 8mm.
15mm.
15mm.
Silicon glue pilot.
INSTALLING THE BATTERY-RECEIVER.
1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
18
60mm.
Attach the aluminium tube into fuselage.
Insert two wing panels as pictures below.
Instruction Manual
Battery.
Receiver.
ATTACHMENT WING-FUSELAGE.
Antenna.