Table of Contents
Advertisement
Web configurator – configuring the telephone via a PC
Querying the phone status
Please note:
– The default time server "europe.pool.ntp.org" will remain stored in the base station even if you
overwrite it. If you delete your time server from the
activated, the base station will return to synchronisation with the default time server. However, it
will no longer appear in the
– The base station will return to synchronisation with the default time server if you have entered
your own time server in the
and date for ten consecutive attempts.
– If you have deactivated synchronisation with a time server, and if the date and time are not set on
any handset, then the base station will attempt to reference date and time settings from the CLIP
information of an incoming call.
Querying the phone status
General information about your phone is displayed.
¤
In the menu list, click the
The following information is displayed:
IP Configuration
IP address
The phone's current IP address within the local network. For assigning the IP address,
see page 120.
MAC address
The phone's device address.
Software
Firmware version
Version of the firmware currently downloaded. You can download updates of the
firmware on your phone (page 105). Firmware updates are available on the Internet.
EEPROM version
Version of your phone's EEPROM storage chip (page 181).
152
Time Server
field.
Time Server
field and the base station is unable to synchronise time
Status
tab.
field and synchronisation is still
Time Server
Advertisement
Table of Contents
