Table of Contents
Advertisement
Suffix
Line suffix that you have to add to the phone number of an outgoing call to allow the
account assigned to the suffix to be used as the sending account.
Example: if you dial 123456765#1, the connection will be made and billed through the
first VoIP account, regardless of the number you have assigned to your handset as the
send number and whether you press briefly/press and hold the talk key.
If you dial 123456765#0, the connection will be made via the fixed line network.
Status
The status of the connection will be shown for VoIP connections:
Registered
The connection is activated. The phone has been successfully registered. You can use
the connection to make calls.
Disabled
The connection is deactivated. The phone is not registering with the corresponding
account with the VoIP service. You cannot use the connection to make or receive calls.
Registration failed
Your phone was unable to register with the VoIP service, e.g. because the VoIP access
data is incorrect or incomplete or the phone is not connected to the Internet. There is
information about this in the section "Questions and answers" from page 153 onwards.
Active
You can use the option in the
connections. If a connection is deactivated, the phone will not register for this connec-
tion. The connection can be activated/deactivated by clicking directly on the option. The
change does not need to be saved.
To configure a connection or to change the configuration of a connection:
¤
Click
next to the connection.
Edit
This will open a Web page where you can make the settings needed. More information is
available
u
in the section "Configuring the VoIP connection" on page 124 and
u
in the section "Configuring the fixed line connection" on page 130.
/
Server not accessible
Active
Web configurator – configuring the telephone via a PC
column to activate (
Configuring telephone connections
) and deactivate (
) VoIP
123
Advertisement
Table of Contents
