Gigaset C470 IP Manual page 129

Hide thumbs Also See for C470 IP:
Table of Contents

Advertisement

STUN refresh time
Enter the time intervals at which the phone should repeat the registration with the
STUN server. The repeat is required so that the entry of the phone in the tables of the
STUN server is retained. The repeat will be carried out for all activated VoIP phone num-
bers.
Ask your VoIP provider for the
The default is 240 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.
NAT refresh time
Specify the intervals at which you want the phone to update its entry in the NAT routing
table. Specify an interval in seconds that is a little smaller than the NAT session timeout.
As a rule you should not change the preconfigured value for the
Outbound proxy mode
Specify when the outbound proxy should be used.
Always
All signalling and voice data sent by the phone is sent to the outbound proxy.
Auto
Data sent by the phone is only sent to the outbound proxy when the phone is connected
to a router with symmetric NAT or blocking firewall. If the phone is behind an asymmet-
ric NAT, the STUN server is used.
If you have set
STUN enabled
is always used.
Never
The outbound proxy is not used.
If you do not make an entry in the
ently of the selected mode, as with Never.
Outbound proxy
Enter the (fully qualified) DNS name or the IP address of your provider's outbound proxy.
Please note:
With many providers, the outbound proxy is identical to the SIP proxy.
Outbound proxy port
Enter the number of the communication port used by the outbound proxy.
The default port is 5060.
Saving settings on the phone
¤
Click
to save the changes.
Set
The
Connections
list will be shown after saving (see Figure 3 on page 122).
If you want to reject the changes that have been made, click Cancel.
Clicking
Delete
will reset all the values back to their default settings. Fields with default set-
tings are empty.
STUN refresh
time.
=
or have not entered a STUN server, the outbound proxy
No
Outbound proxy
Web configurator – configuring the telephone via a PC
Configuring telephone connections
NAT refresh
field, the phone behaves independ-
time.
129

Advertisement

Table of Contents
loading

Table of Contents